精密管随时发货

3月份以来，国内无缝钢管的产量一直在放缓。中国2012年10月无缝钢管产量为248万#，比去年同期增长8.6%；1-10月无缝钢管累计产量达到22859万#，比去年同期增长6.9%。它也可以快速升级。中国无缝钢管产量在2018年11月为25.72亿，比去年同期增长299000，同比增长13.2%，同比增长3.71%，一月至十一月累计生产256.35亿。8.2%的蔗糖。公司主要生产产品：大口径厚壁直缝埋弧焊钢管、方管、矩形管、锥形管、非标钢管、复合钢管、无缝钢管、水电管、热膨胀钢管、热膨胀无缝钢管、拉杆。GE直径钢管、不锈钢管、低合金、合金钢管等，可根据用户要求制造。钢管材质为：Q23 5B、Q345 B、Q345 C、Q345 D、Q345 QD（桥梁专用钢管）、15CrMo、30CrMo、耐磨钢管、X46、X60、X70系列等非标特种钢管。

Cold rolled non decarbonization cold rolled strip was annealed under protective atmosphere. The protective atmosphere consists of a single inert gas, argon or helium, but also includes mixed gases. By adjusting the composition of these mixed gases, the speed of redox, decarbonization and Carburization in the annealing process of strip steel is equal, so as to realize the non-oxidation and non-decarbonization annealing of strip steel. After annealing, bright precision tubes should be decarburization. The annealing factor of the bright tube depends on the atmosphere and redox reaction. And other inert gases are neutral protective atmospheres of steel. It is widely used, but the oxygen atmosphere must be removed to play a good protective role. Commonly used mixed protective atmospheres.结构用无缝钢管（GB/T8162-2008）是用于一般结构和机械结构的无缝钢管。流体输送用无缝钢管（GB/T8163-2008）是用于输送水、油、气等流体的一般无缝钢管。内外涂塑复合钢管是以焊接钢管为基材 可在受污染的海水光亮精密管退火可保持光亮管的外观精度，尺寸精度高，越来越受到客户的青睐。

添加钛、铌等微合金元素形成弥散的氮化物或碳氮化物，导致冷轧精密光亮钢管的韧脆转变温度升高。(3)晶粒尺寸对韧脆转变温度有影响，随着晶粒粗化，韧脆转变温度升高。冷轧和精密光亮钢管的晶粒脆化倾向得到了广泛的应用。高春铁（0.01% C）的Tc在该温度以下的100C完全易碎。冷轧精密光亮钢管中大部分合金元素都提高了韧脆转变温度和冷脆倾向。室温以上发生韧性断裂时，冷轧精密光亮钢管的断口为韧窝断裂，低温脆性断裂时断口为解理断裂。

Following the decline in crude steel production in the first ten days of this month, crude steel production rose again in the first ten days of this month. Inventories of heat preservation and anticorrosion pipe manufacturers and factories also declined. The production situation of secondary or steel plants is not clear. At present, as raw material prices continue to fall, consumer enterprises still have profit margins; coupled with financial pressure, most steel mills need to maintain operation in order to continue to obtain savings; therefore, steel mills still adhere to a higher start-up rate; Anshan region, for example, as of this month, Tangshan blast high production capacity application rate. Up to.0%, the rate of increase was normal.