精密管-精密管品牌

The vacuum carburizing temperature is generally higher than that of ordinary gas carburizing. Carburizing and diffusion are often used at 920~1040 C. As shown, there are two stages: pulse ventilation, stop gas, multi-stage carburizing and diffusion. The effect is better. Vacuum carburized layer is formed faster than ordinary gas, liquid and solid carburized layer because of its high temperature, especially its clean surface and high activity. If the carburized layer needs 1 millimeters, it will take 927 hours and 1 hours at 1033 degrees Celsius, only 5 hours.
Precision steel pipe has the advantages of no oxide layer on the inner and outer walls, high pressure, no leakage, high precision, high finish, small cold bending deformation, high flatness, no cracks and so on. It is mainly used to produce pneumatic or hydraulic components. As a cylinder or an oil cylinder, it can be a seamless tube. The chemical composition of cold drawn precision steel pipe

Oil quenching causes surface deterioration easily. Due to the high surface activity, significant thin layer carburization can occur under the action of short and high temperature oil film. In addition, the adhesion of carbon black and oil on the surface is not conducive to simplifying the heat treatment process. The development of vacuum quenching technology mainly lies in the development of single gas cooled quenching furnace with excellent performance. Double chamber furnace can also be used for gas quenching (front chamber air jet cooling), but the operation of the two stations makes it difficult to load a large number of furnace, and easy to cause workpiece deformation or change the direction of workpiece quenching. NG deformation during high temperature movement.

山东大鼎钢管厂公式计算钢管的理论重量：W=(D-S)＊S＊0.02466，其中W=钢管每米的重量；S=钢管的公称壁厚；D=钢管的公称外径，光亮管的表面质量i清洁、无氧化层、无裂纹、折叠、轧制、结疤、分离层和条纹。